Instructions For Smart Grid; Important - KENMORE ELITE 111.7269 Serie Manual De Uso Y Cuidado

INSTRUCTIONS FOR SMART GRID

IMPORT ANT:
Y ou must connect your Kenmore Smart appliance to the
internet and then register the appliance to your account in
order to use the Smart Grid function.
Consult the Quick Start Guide supplied with the appliance
for instructions on how to register your appliance using the
Kenmore application (app).
The Smart Grid Button serves two purposes:
1 ) internet connection or disconnection, 2) enable or
disable/ override the appliance Demand R esponse
capability.
NOTE: This appliance is a connected-ready appliance,
allowing you to remotely monitor and control it from your
smart phone via the Kenmore® Smart app.
T o connect the refrigerator to the Internet:
R efer to the Quick S tart Guide that came with your smart
appliance for detailed instructions on creating a Kenmore
account and setting up your appliance for connected
operation from your smart phone. This Use & Care Guide
contains information and instructions for operating
your appliance from the appliance control panel. For
additional assistance, visit http:/ / www.kenmore.com/
smart
NOTE: If no connection is made after ten minutes, the
blinking SMAR T GR ID button LED will turn off .
USING YOUR REFRIGERATOR
24
Smart Grid Operation:
Once connected and registered, the appliance is capable
of accepting a signal from your electrical company. The
signal, known as a Demand R esponse (DR ), will adjust
refrigerator operation to reduce power consumption for
a period of time ranging from a few minutes up to a
maximum of 4 hours. Ice making will be delayed during
this time. Opening the refrigerator door may cancel
certain DR signals.
The Grid Mode LED (red) will be steadily lit when the
signal is in eff ect. T o disable the signal and prevent further
signal acceptance, press and release the Smart
Grid button. Both the Grid Mode and Smart Grid LED will
turn off . P ress and release the Smart Grid button again to
enable DR signal acceptance capability. The Smart Grid
button LED will relight. T he Grid Mode LED will light when
another DR signal is sent.