How To Replace P Antr Y Drawer And Freezer Drawer Handles - KENMORE ELITE 111.7269 Serie Manual De Uso Y Cuidado

NOTE: R emoving the doors is always recommended when it is necessary to move the refrigerator through a narrow
opening. If it is necessary to remove the handles, follow the directions below.
HOW TO REMOVE P ANTR Y DRAWER
AND FREEZER DRAWER HANDLES
NOTE: Handle appearance may vary from the
illustrations on this page.
Us e the provided 2.5 mm hex key to loosen the
2 set screws located on the inside top ends of the
handle. R emove the handle from the underlying
handle mounting bolts on the drawer.
HOW TO REPLACE P ANTR Y DRAWER
AND FREEZER DRAWER HANDLES
NOTE: Handle appearance may vary from the
illustrations on this page.
P l ace the handle ends onto the handle mounting
bolts on the drawer. Use the 2.5 mm hex key to
tighten the 2 set screws to secure the handle in
place.
NOTE: If the handle mounting fasteners need to be WARNING
tightened or removed, use a ¼ in. Allen wrench.
When assembling or disassembling the handles:
• Grasp the handle firmly to ensure it will not drop or
cause injury.
• P revent the handle from swinging toward nearby
people or animals.
• Insert the handle footprints over the door mounting
fasteners and tighten the hex screws to fix the handle
in place.
• Check for any gap between the door and handle after
the handle is fixed in place.
REFRIGERATOR INST ALLATION
N P
Mounting
Bolts
Set Screw
Hex Key