Refrigerator Installation; Unp Acking Your Refrigerator - KENMORE ELITE 111.7269 Serie Manual De Uso Y Cuidado

WARNING
Excessive Weight Hazard:
Use two or more people to move and install the
refrigerator. Failure to do so can result in back or other
injury.

UNP ACKING YOUR REFRIGERATOR

R emove tape and any temporary labels from your
refrigerator before using. Do not remove any warning- type
labels, the model and serial number label, or
the T ech Sheet that is located under the front of the
refrigerator.
T o remove any remaining tape or glue, rub the area briskly
with your thumb. T ape or glue residue can also be easily
removed by rubbing a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water
and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator.
R efrigerator shelves are installed in the shipping position.
P lease reinstall shelves according to your individual storage
needs.
R emove all cantilevered refrigerator compartment shelves
and remove the protective shipping tape found on the
attachment hooks at back of shelves. For shelf removal
instructions, see R efrigerator Shelves in USING YOUR
R EFR IGER ATOR section of this Use & Care Guide.
REFRIGERATOR INST ALLATION
1 0
WARNING
Excessive Weight Hazard:
Y our refrigerator is heavy. When moving the refrigerator
for cleaning or service, be sure to protect the floor.
Always pull the refrigerator straight out when moving
it. Do not wiggle or walk the refrigerator when trying to
move it, as floor damage could occur.
WARNING
Explosion Hazard:
Keep flammable materials and vapors, such as gasoline,
away from the refrigerator. Failure to do so can result in
fire, explosion, or death.