Care And Maintenance - Lavorwash Silent Traducción De Las Instrucciones Originales

12-Ensure that power sockets used ore
correct for the machine
13-Never grasp the mains plug with wet
hands.
14-Check the voltage indicated on the
rating plate is the same as the supply vol-
tage.
15-These machine are not designed for
picking up health endangering dusts or in-
flammable/explosives substances (like ash
and soot).
16-Never leave the equipment unatten-
ded whilst in use.
17-Never carry out any maintenance on
the machine without first disconnecting
from the mains supply or when it is left
unattended or reachable by children or di-
sables.
18-The mains supply cable should not be
used to pull or lift the machine.
19-The machine should never be emer-
sed in water or a pressure jet of water used
for cleaning.
20-17- The use of the device is not al-
lowed in potentially damp areas (for
example in the bathroom) .
21-Periodically examine the mains
cable and machine for damage. If any
damage is found, do not use the ap-
pliance but contact your service centre
for repair.
22-If the suplly cord is damaged, it must
be replaced by the manufacturer, its servi-
ce agent or similarly qualified persons in
order to avoid an hazard.
23-Should extension cables be used, en-
sure that these lay on dry surfaces and pro-
tected against water jets.
27-Service and repairs must be carried
out by qualified personnel only. Only use
manufacturer original spare parts for ser-
vice repair.
28-The manufacturer cannot be held re-
sponsible for any damage/injury caused
to persons, animals or property caused by
misuse of the appliance, not in compliance
with manual instructions.
USAGE (see fig. ②③④⑤⑥⑦)
• Be sure that switch is in off position (0) OFF
and connect the machine to a suitable so-
cket.
• The machine must be always kept on hori-
zontal bases, in a safe and stable way.
• Insert the suitable filters for the proper
use.
•Never use the appliance without filters .
• Use the most suitable accessories for the
requested usage.
• Put switch on (I) ON position in order to
start the machine.
• When job is over, switch off (0) OFF and
keep away the plug from the socket.
• If the appliance is used with especially fine
dust (size below 0.3 µm) the filter supplied
will require cleaning more frequently. For
especially demanding applications, the
use of specific filters supplied as an optio-
nal may be necessary.

CARE AND MAINTENANCE

The unit is maintenance-free.
• The machine shall be disconnected from
its power source, by removing the plug
from the socket-outlet, during cleaning or
maintenance
• Clean the exterior part of the machine
with a dry cloth.
• Move the appliance only by catching the
carrying handle located on the motor
head.
• Store the appliance and the accessori-
es in a dry safe place, out of the reach of
children.
10