Maintenance; Maintenance Schedule - Hoshizaki KM-470AJE-R452 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 88
ENGLISH
III. Maintenance
The appliance must be maintained in accordance with the instruction manual and labels
provided. Consult with your local Hoshizaki Certified Service Representative about
maintenance service.
• Only qualified service technicians should service the appliance.
• To reduce the risk of electric shock, do not touch the control switch with damp hands.
• Move the control switch to the "OFF" position and turn off the power supply before
servicing. Lockout/Tagout to prevent the power supply from being turned back on
inadvertently.
• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after any maintenance is done to the appliance. Make sure that
none have fallen into the dispenser unit/ice storage bin.
A. Maintenance Schedule
The maintenance schedule below is a guideline. More frequent maintenance may be
required depending on water quality, the appliance's environment, and local sanitation
regulations.
Frequency Area
Daily
Scoop
Bi-Weekly
Air Filters
Monthly
External Water
Filters
Icemaker Exterior
Underside of
Icemaker and Top
Kits; Bin Door
Yearly
Icemaker and
Dispenser Unit/Ice
Storage Bin
Water Supply Inlet Close the icemaker water supply line shut-off valve and drain the water
Condenser
Water Hoses
WARNING

Maintenance Schedule

Task
Clean the ice scoop using a neutral cleaner. Rinse thoroughly after
cleaning.
Inspect. Wash with warm water and neutral cleaner if dirty.
Check for proper pressure and change if necessary.
Wipe down with a clean, soft cloth. Use a damp cloth containing a neutral
cleaner to wipe off oil or dirt build up. Clean any chlorine staining (rust
colored spots) using a non-abrasive cleanser.
Wipe down with a clean cloth and warm water.
Clean and sanitize per the cleaning and sanitizing instructions provided in
this manual. See "III. B. Cleaning and Sanitizing Instructions".
system. Clean the water supply inlet screen.
Inspect. Clean if necessary by using a brush or vacuum cleaner. More
frequent cleaning may be required depending on location.
Inspect the water hoses and clean/replace if necessary.
15
Tabla de contenido
loading

Tabla de contenido