Edit Day, Time And Program - Cointra SIENA Serie Instrucciones Para La Instalación Y El Uso

5.5.

Edit day, time and program

To edit the day, time and program, press and hold the mode key for 2.5 seconds (from any
mode) until the clock icon appears on the screen:
The edition of the day of the week, time and program starts. This screen will
also be automatically displayed when the emitter loses the time after being
disconnected from the power supply for more than 4 days.
First, the day of the week is selected with the - and + keys (indicated by a
flashing box). To confirm and set the day, press the OK key and it goes to
edit the time; the hour digits are flashing.
To change the hour, use the - and + keys. To confirm and set the hour, press
the OK key. Then the minutes digits are flashing, which can be also changed
with the - and + keys. To confirm press the OK key, and it goes to the
program edition.
*Note: If the emitter had simply lost the time and day, it does not enter the program edition, but
returns to the last active mode.
In the program edition screen, information about the selected interval and its set point
temperature is displayed at the top.
For example "PROG. D: 1 00h-01h" indicates day 1 of the week and
hour from 00h to 01h.
"18.0 °C" indicates the set point temperature of day 1 from 00h to
01h, which in this case is the eco setpoint. The "00h-01h" interval is
flashing to indicate that it can be modified with - and + keys.
At the bottom of the screen a 24 bar chart is displayed corresponding to one full day divided in
the 24 intervals of 1 hour. The bar of the selected interval has a small triangle just above it and
is flashing to indicate that it can be modified with the mode key. The length of each bar
indicates the mode:
Long length = Comfort
-
Average length = Economy
-
Short length = Heating off
-
On the left axis of the bar chart are the 3 mode icons; the mode chosen for the interval being
programmed also flashes at the same time as the bar. To change the mode of each interval,
press the mode key; it switches between comfort, eco and heating off. To move to the next or
previous interval, press + or - respectively.
By pressing the OK key, the current program is saved and it goes forward to the next day. By
pressing and holding the OK key the program of the current day is copied to the next day
or days. After Day 7, when confirming with OK key, it exits the program edition, returning to the
mode in which it was.
To finish editing the program edition at any time you can press and hold the mode key for 2.5
seconds.
44
EN EN EN EN
SIENA
A73021514