Assembling The Heater - Cointra CAMI 6 Instrucciones De Uso, Instalación Y Mantenimiento

2.3 Assembling the heater

Before assembling the heater, make sure the water and gas connections
are properly secured, identified, and positioned.
See the dimensions and connections in section 4.2.
• Fix the plugs and hooks on the wall, in a central position vertical to the appliance, as shown in the figure below.
• Mark the position of the bottom screws
• Hang the water heater on the plugs+hooks and tighten the screws for fixing the unit to the wall.
• Connect the hot and cold water flexible tubes, remembering to check their tightness. To avoid circulation problems,
do not remove the cold water inlet filter.
44
66
60
EN
195 44
Mod. 6 l.
150 66
fig. 6 - Assembly template
cod. 3542C100 - Rev. 01 - 09/2022
80 170
mod. 11l.
80 170
CAMI
80
80