Zodiac MEDLINE 500 Manuel Du Propriétaire página 94

Ensure that the system is in working order (unblocked pipes, plugs
out, bilge pump switch on automatic mode, battery charged).
At anchor, set the bilge pump switch to the automatic position.
WARNING
The output of your pump is approximately 30 litres a minute (580, 45 litres a minute (660). It may be
accessed via the after locker.
CHECK THE OPERATION OF THE BILGE PUMP AT REGULAR
INTERVALS (see manual). Clean the intake strainers of any debris liable to
cause a blockage.
WARNING
Access to the bilge pump is through the rear locker
Medline 660: Unscrew the two screws (1), lift the
locker to access the pump
1
1
INSTALLATION AND CIRCUIT - Draining
HULL SCUPPER
Medline 580: The bilge pump is directly accessible
from the rear locker
Page 42 / 59