Cutting Depth Setting; Setting For Bevel Cuts - Mafell K65cc Instrucciones De Funcionamiento Y Seguridad

K65cc/KSS60cc

5.6 Cutting depth setting

The cutting depth can be set continuously in a range between 0 and 66 mm [0 to 2.6 in].
Use the following procedure to set the cutting
depth:
1. Release the clamping lever (9).
2. Use the plunge lever (1) to set the cutting
depth.
The cutting depth is indicated on the
➢
scale (2) on the cover. The area with a
red background of the plunge lever (1)
serves as pointer.
3. Tighten the clamping lever (9).
The cutting depth is set.
✓
For separating cuts, always set the
cutting depth to approx. 2 ... 5 mm
[0.08 ... 0.2 in] more than the
material thickness you want to cut.

5.7 Setting for bevel cuts

For bevel cuts, the saw unit can be set to any angle from 0° to 45°.
Use the following procedure to set the saw unit
for bevel cuts:
1. For tilting, put down and support the machine
so that the saw unit can be tilted.
2. Release the lever (10).
3. Use the scale (11) on the tilting segment to set
the angle.
4. Tighten the lever (10).
The saw unit is set to the desired angle
✓
for the bevel cut.
01/2022
Fig. 17: Setting the cutting depth
Fig. 18: Setting the saw unit for bevel cuts
23