Warranty And Limitation Of Liability - Qilive Q.6806 Manual De Instrucciones

If the filter shows signs of wear and tear it must be replaced; contact customer service for
support.
5.3. CLEANING A BLOCKED SUCTION HOSE, SUCTION TUBE OR
FLOOR BRUSH
1. Separate the suction hose (12) and suction tube (14) into its individual components.
2. Check which part is blocked and carefully remove the blockage with a suitable tool (e.g. a
stick).
5.4. CLEANING THE VACUUM CLEANER CASING
1. Disconnect the vacuum cleaner from mains power. Pull the mains plug.
2. Wipe the casing with a dry or slightly damp cloth. Ensure that no moisture remains on the
casing.
3. Do not use any cleaning agents, aggressive solutions or scratch pads for cleaning the casing,
since this will damage the finish.

6. WARRANTY AND LIMITATION OF LIABILITY

This product is guaranteed for a period of 12 to 24 months (as defined by local legislation, with the
period as per the till receipt) from the date of purchase, against any fault resulting from a defect in
materials or manufacturing.
This warranty does not cover damages caused by improper use or normal wear and tear of the
product.
Specifically, the warranty does not cover:
■ Damage or problems caused by improper use, an accident, an alteration or power supply of
unsuitable current or voltage.
■ Modified products, or those whose warranty seal or serial number is damaged, altered,
removed or oxidised.
■ Replaceable batteries and accessories are guaranteed for a 6-month period.
■ Battery failure, caused by excessively lengthy charging or by the failure to observe the
safety precautions explained in the manual.
■ Visual damage, including scratches, dents or any other elements.
■ Damage caused by any intervention conducted by a non-accredited person.
■ Defects caused by normal wear and tear or due to normal ageing of the product.
■ Software updates, due to a change in network settings.
■ Product failures due to the use of third-party software to modify, change or adapt the existing
software.
■ Product failures due to the use of accessories that have not been approved by the
manufacturer.
■ Oxidised products.
The manufacturer cannot, under any circumstances, be held responsible for the loss of data
stored on the disc. Likewise, the manufacturer is not obliged to verify that SIM/SD cards are
properly removed from returned products.
Repaired or replaced products may include new and/or reconditioned components and equipment.
METHODS FOR INVOKING THE WARRANTY
To obtain a warranty service, please bring your product to your point of sale's welcome desk along
with your proof of purchase (till receipt, bill, etc.), the product and the accessories provided, along
with its original packaging.
It is important to have the following information: date of purchase, model, and serial or IMEI
number (this information generally appears on the product, packaging or your proof of purchase).
Failing that, you must bring back the product along with the accessories required for it to operate
properly (power supply, adapter, etc.).
13
EN