Maintenance And Cleaning - Qilive Q.6806 Manual De Instrucciones

4.2. VACUUMING INSTRUCTIONS
EN
Fig. 4
Fig. 5
Fig. 6
Fig. 7

5. MAINTENANCE AND CLEANING

Warning! The plug must be removed from the power socket before any maintenance or
replacement.
If the power cord is damaged, it must be replaced by the manufacturer or its service agent
or an appropriately qualified person in order to avoid a hazard.
Insert the mains plug with power cord (9) into a power
socket conforming to the voltage specifications of the
vacuum cleaner.
Press the ON/OFF switch (12) with your foot to start the
vacuum cleaner (Fig 4).
Adjust the suction power of the vacuum cleaner:
Rotate the suction power control knob (13) (Fig 5).
Carry vacuum cleaner only by the handle (1) when moving
around (Fig 6).
Switch off the vacuum cleaner with the ON/OFF switch (12)
after completing your work.
Pull the plug from the mains socket.
Press the cord rewinding button (7) to retract the power cord
into the cable compartment (Fig 7).
10