About This Document; General Safety Precautions - STEINEL IS 180 digi HD Manual De Instrucciones

GB

1. About this document

Please read carefully and keep in a safe place.
– Under copyright. Reproduction either in whole or
in part only with our consent.
– Subject to change in the interest of technical
progress.

2. General safety precautions

Failure to observe these operating
!
instructions presents hazards!
These instructions contain important information on
the safe use of this product. Particular attention is
drawn to potential hazards. Failure to observe this
information may lead to death or serious injuries.
• Read instructions carefully.
• Follow safety advice.
• Keep instructions within easy reach.
– Working with electrical current may produce
hazardous situations. Touching live parts can
result in electrical shock, burns or death.
– Work on mains voltage must only be performed
by qualified, skilled personnel.
– National wiring regulations and electrical operat-
ing conditions must be observed
(e.g. DE: VDE 0100, AT: ÖVE-ÖNORM E8001-1,
CH: SEV 1000).
– Only use genuine replacement parts.
– Repairs must be made by specialist workshops.
3. IS 180 digi HD
Proper use
– Sensor suitable for wall mounting indoors and
outdoors.
– Sensor can be used on its own or interconnect-
ed using Connect Bluetooth Mesh.
Features
– Operation via Steinel Connect App.
Operating principle
– The integrated infrared sensor detects the heat
radiated from moving objects (e.g. people,
animals).
– The heat detected in this way is converted
electronically into a signal that automatically
switches ON a connected load (e.g. a light).
– The most reliable way of detecting motion is
to install the unit with the sensor aimed across
the direction in which a person would walk.
– Reach is slightly restricted when the unit is
approached head on.
– Obstacles (e.g. trees, walls etc.) interrupt the
line of sensor vision.
– Heat radiation is not detected through obstacles
(e.g. walls or panes of glass), the sensor is
not triggered.
– Sudden fluctuations in the temperature from
changes in weather are not distinguished
sources of heat.
Package contents (Fig. 3.1)
Product dimensions (Fig. 3.2)
Product components (Fig. 3.3)
A Sensor unit
B Sensor connection plug
C Wall mount
D Surface-mounted wall base
E Connecting terminal
F LED
Technical specifications
– Dimensions (H × W × D):
– Power supply:
– Stand-by power consumption:
– Time setting:
– Twilight setting:
– Reach:
– Mounting height:
– Sensor system:
– Angle of coverage:
– Temperature range:
– Bluetooth frequency:
– Bluetooth transmission power
– IP rating
Switching capacity:
– Incandescent / halogen lamp load:
– Low-voltage halogen lamps:
– Fluorescent lamps, uncorrected:
– Fluorescent lamps, series-corrected:
– Fluorescent lamps, parallel-corrected:
– Fluorescent lamps, electronic ballast:
– LED lamps < 2 W:
– 2 W < LED lamps < 8 W:
– LED lamps > 8 W:
– Capacitive load:
– LED in compliance with
IEC 60669-2-1:2002/AMD2: 2015:
* VDE tested
– 10 –
116 × 116 × 42 mm
220-240 V, 50/60 Hz
< 0.6 W
5 s - 60 min
2-2,000 lux, daytime mode
9 m tangentially, 6 m radially,
mounted at a height of 2.0 m
1.8-2.5 m
passive infrared
-20°C to +40°C
2.4 to 2.48 GHz
5 dBm/3 mW
2,000 W *
2,000 VA
1,000 VA
400 VA
400 VA
1,500 W
176 μF
400 W *
180°
IP 54
100 W
300 W
600 W