About This Document; General Safety Precautions - STEINEL True Presence Multisensor KNX Manual

GB

1. About this document

– Please read carefully and keep in a
safe place.
– Under copyright.
Reproduction either in whole or in part
only with our consent.
– Subject to change in the interest of
technical progress.
Symbols
!
Hazard warning!
Reference to other information
... in the document.

2. General safety precautions

Disconnect the power supply
!
before attempting any work on
the sensor.
• This product must only be installed by
a qualified electrician in accordance
with national wiring regulations as de-
fined in VDE 08 29 (DIN EN 5000 90).
• Fitted improperly, low-voltage instal-
lations can cause extremely serious
personal injury or damage to property.
• This product must never be con-
nected to a 230 V AC power supply
as it is intended for connection to an
extra-low voltage power supply.
• Only use genuine replacement parts.
• Repairs may only be made by special-
ist workshops.
3. True Presence
KNX / Multisensor AIR KNX
Proper use
– Multisensor for indoor ceiling mounting
for connecting to the KNX bus system
The True Presence Multisensor KNX and
Multisensor AIR KNX are the "eyes and
ears" in modern, intelligent buildings.
Presence of persons, brightness, room
temperature, humidity, air pressure, CO₂
and volatile organic compounds (VOCs)
are captured as sensor variables.
Note:
Presence can only be detected in con-
junction with True Presence.
The True Presence Multisensor KNX
is also equipped with "True Presence"
technology, which detects the presence
of persons. Thus, true presence and
absence is recognisable. The detection
zone of the multisensor can be precisely
limited via the range setting.
This makes it ideal for use in offices and
schools
For specific applications, such as
cruise ships or hotels, please contact
us directly so we can work together
on defining the best way to integrate
the sensors.
All function settings are made via the
Engineering Tool Software (ETS) from
version ETS4.0 and higher.
The Smart Remote app displays the
sensor variables and enables activation
of the programming mode.
- 13 -
®
Multisensor