Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Automatic Spindle Lock
The automatic spindle lock allows you to use it as a manual screwdriver. You can give an extra
twist to firmly tighten a screw, loosen a very tight screw, or continue working when the battery
charge is depleted. For manual screwdriver purposes, the chuck is automatically locked when
the tool is off.
MAINTENANCE
WARNING
Service
WARNING
cause serious hazard .
Service Center or Authorized SKIL Service Station.
General Maintenance
WARNING
Periodically inspect the entire product for damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product
until all missing or damaged parts are replaced. Please contact customer service or an
authorized service center for assistance.
Chuck Removal (Fig. 15)
The keyless chuck can be removed and
replaced.
a. Lock the trigger switch by placing the
direction-of-rotation selector in the center
position.
b. Open the chuck jaws.
c. Use a screwdriver (not included) to remove
the chuck screw by turning it in a clockwise
direction.
d. Insert a 5/16-in. or larger hex key (not
included) into the chuck of the tool and
securely tighten the chuck jaws around the
hex key.
e. Tap the hex key sharply with a mallet (not included) in a counterclockwise direction. This will
loosen the chuck for easy removal.
NOTICE:
The chuck screw has left-handed threads. Attach a new chuck to the spindle and
tighten the chuck screw.
To avoid serious personal injury, always remove the battery pack from
the tool when cleaning or performing any maintenance .
Preventive maintenance performed by unauthorized personnel may
result in misplacing of internal wires and components which could
We recommend that all tool service be performed by a SKIL Factory
When servicing, use only identical replacement parts . Use of any
other parts could create a hazard or cause product
Fig . 15
damage .
19
Tabla de contenido
Solución de problemas
