Tabla De Contenido - Aesculap Acculan 4 GA344 Instrucciones De Manejo

en
Aesculap®
Attachments for small drill GA344 and drill GA844
Legend
1 Drill
2 Knob (for speed control)
3 Safety catch
4 Rotating sleeve
5 Arrow
6 Attachment with collet chuck
7 Unlocking sleeve
8 Tool coupling
9 Attachment with three jaw chuck
10 Tightening key
11 Tool coupling
12 Kirschner wire attachment
13 Clamping lever
14 Adjustment sleeve
15 Kirschner wire chuck
16 Drill attachment for radiolucent angle transmission
17 Adapter
18 Sagittal saw attachment
19 Tool attachment with L sagittal tool coupling
20 Button for adjusting the tool holder
21 L sagittal saw blade
22 Piece on saw blade for tool release
23 Oil spray adapter
24 Reciprocating Saw attachment
25 Tool attachment with Reciprocating Saw tool coupling
26 Reciprocating Saw blade (e.g. GP550R to GP576R)
27 Leaf spring on Reciprocating Saw blade for tool release
28 Screw attachment
29 Lever
Symbols on product and packages
Caution
Observe important safety information such as warnings
and precautions in the instructions for use.
Machine-readable, two-dimensional code
The code contains a unique serial number which can be
used for electronic tracking of the individual instru-
ment. The serial number is based on the global standard
sGTIN (GS1).
Manufacturer
Date of manufacture
Manufacturer's batch designation
LOT
SN Manufacturer's serial number
2
Acculan 4 / ELAN 4 electro
Manufacturer's article number
REF
Temperature limits during transport and storage
Air humidity limits during transport and storage
Atmospheric pressure limits during transport and stor-
age
Contents
1. Applicable to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Main functions and design characteristics . . . . . . . . . . . . . . . .
2.2.1 Operating mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3 Indications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4 Absolute contraindications . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.5 Relative contraindications . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Safe handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. Product description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1 Scope of supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 Components required for operation . . . . . . . . . . . . . . . . . . . . .
4.3 Operating principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6. Working with the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1 System set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1.1 Connecting the accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1.2 Protection against inadvertent activation . . . . . . . . . . . . . . . .
6.1.3 Attaching/removing attachment for drill . . . . . . . . . . . . . . . . .
6.1.4 Attaching and detaching the tool from the attachment. . . . .
6.2 Function checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3 Safe operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3.1 Operating the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.3.2 Operating the screw attachment. . . . . . . . . . . . . . . . . . . . . . . .
7. Validated reprocessing procedure . . . . . . . . . . . . . . . . . . . . . . .
7.1 General safety notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2 General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3 Preparations at the place of use . . . . . . . . . . . . . . . . . . . . . . . .
7.4 Preparation before cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.5 Cleaning/disinfection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.5.1 Product-specific safety instructions for the reprocessing
procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.6 Manual cleaning with wipe disinfection. . . . . . . . . . . . . . . . . .
7.7 Mechanical cleaning/disinfection with manual pre-cleaning. 10
7.7.1 Manual pre-cleaning with a brush . . . . . . . . . . . . . . . . . . . . . . 10
7.7.2 Mechanical alkaline cleaning and thermal disinfection . . . . . 10
7.8 Inspection, maintenance and checks. . . . . . . . . . . . . . . . . . . . . 11
3
3
3
3
3
3
3
4
4
4
4
4
4
5
5
5
5
5
5
5
7
7
7
7
8
8
8
8
8
8
8
9