2�5 Service Life; 2�6 Authorized Persons; Product Description; 3�1 General Description - Renfert POWER steamer 1 Manual De Instrucciones

► Unauthorized persons are not permitted within range of the steam jet. To prevent injuries, be care-
ful with the hot steam.
► To prevent electrical accidents as well as damage to the unit, steam must never be directed at the
unit and liquid must never be allowed to enter the unit.
► Do not operate the unit with an empty pressure tank. This causes damage to the unit!
► Do not use chemical additives. Only use water to operate the unit.
► Steam cleaning units can cause unpleasant levels of noise during operation. Wear personal hear-
ing protection when in the working area.
► The user is responsible for verifying the cleaning result.
► When descaling, observe the instructions for use of the descaling solution.
2.5 Service life
The maximum service life strongly depends on the conditions of use, in particular on compliance with the
prescribed cleaning and maintenance intervals�
However, even if all prescribed cleaning and maintenance intervals are observed, an unlimited service life
is not possible due to hazard risks�
Irrespective of obligatory recurrent testing by the operator (country-specific, see 2.4.1), the equipment
must undergo functional and equipment safety testing by an authorized specialist company after 6 years
of operation, or if this test is not carried out, the equipment must be taken out of service, in particular with
regard to non-obvious signs of wear and hazard risks�
2.6 Authorized persons
Operation and maintenance of the equipment may only be performed by trained personnel�
Unauthorized persons, in particular children, are not permitted to use this equipment�
Any repairs not described in these operating instructions may only be performed by a qualified electrician.
2.7 Disclaimer
Renfert GmbH shall be absolved from all claims for damages or warranty if:
► The product is employed for any purposes other than those specified in the operating instruc-
tions.
► The product is altered in any way other than those alterations described in the operating instruc-
tions.
► The product is not repaired by an authorized dealer or if original Renfert spare parts are not used.
► The product continues to be used despite obvious safety defects or damage.
► The product is subjected to mechanical impact or is dropped.
► The prescribed cleaning and maintenance intervals are not observed, or a descaling solution is
used that is not approved by Renfert.
3

Product description

3.1 General description
Water is heated to approx� 155 °C in a pressure tank� This results in a relative vapor pressure of approx�
4.5 bar. The pressure tank is filled either manually or automatically.
The steam is provided via the nozzle through an electrically-activated solenoid valve�
Deposits can be easily removed through the service opening on the side�
Drinking water with water hardness typical for the area is used for operation�
The POWER steamer 2 is additionally equipped with:
• A manometer
• A water connection
• Fill level measurement with a pump and a solenoid valve to automatically fill the pressure tank
Plaster models or investment models can be left to dry on the model tray (2, Fig� 1)�
- 5 -
en