Technical Data; Unpacking And Assembling - Columbus KS 90 VM 60 Instrucciones De Montaje

2. Technical Data

Sweeping width:
2 side brushes
−
1 side brush
−
without side brushes
−
Working speed
Surface cleaning capacity with 2 side brooms
Volume flow
Vacuum
Filter surface
Absorptive capacity of the sweeping vessel
Allowable inclination
Length x width x height
Displacement
Set speed
Power at set speed
Gas tank contents:
Weight
Sound level

3. Unpacking and Assembling

Let the box stand on the pallet. Cut the front side open and let the
machine roll over the side of the box which has been folded down (see
Figure) so that the running wheels are still standing on the pallet.
In this position, clip the side brushes which are on the dirt container
under the side brush plate (in the front exterior portion of the machine)
(see Figure). Apply light pressure to twist the brushes upwards until you
can feel them lock into place. Note: do not tip over the machine in this
process: there is the danger of battery acid running out.
First roll the machine from the box and from the pallet.
Afterwards, put the steering handle in the upright position, pull it
downwards into the two tappets completely (see Figure) and tighten it
with the two thumb screws.
900 mm
700 mm
500 mm
up to 4,0 km/h
2
3600 m /h
3
200 m /h
7 Pa
2
1,3 m
60 l
20%
1000 x 780 x 460 mm
(without steering handle)
31 cc
5200 r.p.m.
(Do not adjust speed!)
1.18 HP/ 0.87 kW
Approx. 1.0 l
52 kg
69 dB(A)
11