Important notice
1.3
In accordance with the intended use, the CE marking is displayed based on the
following EU directives:
2006/42/EC, 2014/30/EU and 2011/65/EU.
The Medical Device Directive 93/42/EEC and Medical Device Regulation 2017/745
(MDR) is not applicable to sealing devices.
The limit values of IEC 60601-1 must not be applied in repeated electrical
inspections.
The manufacturer accepts no liability whatsoever for damage caused by tests in
accordance with standards not listed in the declaration of conformity.
In the event of conversion work or interventions to the device undertaken without the
express written permission of the manufacturer, the warranty shall be deemed void
and any liability for physical or material damage shall be transferred to the operator.
Cleaning
1.4
Before cleaning, disconnect the mains plug from the socket and disconnect the device from the power supply
with the plug.
Clean the device only with a dry or damp soft cloth and a mild cleaning agent. (E.g.: isopropanol, spirit, etc.)
Do not allow any water to find its way into the device.
9.696.160
TecnoSeal TA009TAU
Caution! Never wet clean the device!
Chapter 1
Page 4
Introduction
V 1.01