Power Supply; 8- Saving Or Deleting Remote Controls - Vimar ELVOX ECG3 Manual Para El Conexionado Y El Uso

System type:
It is absolutely necessary for there to be electromechanical limit switches that stop the motor

8- Saving or deleting remote controls

The control unit can save up to a maximum of 100 remote controls with 2 buttons, the first saved remote control configures the control unit to accept only
rolling codes or hard coding with DIP switches. To change the type of remote controls you need to perform total deletion following the procedure described
in paragraph 8.4
8.1 Saving a button on the remote control as an opening and stopping button
- Press and hold down the P1 button until the DL1 LED starts flashing slowly with a green light (2 sec.).
- Press the button on the remote control to be saved as the opening button
- LED DL1 will light up steady for 1 second and then go out to confirm saving
RELAy 1
RELAy 2
8.2 Saving a button on the remote control as a closing and stopping button
- Press and hold down the P1 button until the DL1 LED starts flashing quickly with a green light (4 sec.)
- Press the button on the remote control to be saved as the closing button
- LED DL1 will light up steady for 1 second and then go out to confirm saving
24
All manuals and user guides at all-guides.com

Power supply

Closed
Open
Open
Closed
Push-button
.
EN