3- Wiring for power line, flashing light and electric motor::
DIP switch DIP status
OFF
ON
SW1
OFF
ON
OFF
SW2
ON
Set the DIP switches before powering
3.1- Operation for awnings (set DIP switch SW2 OFF)
LED ab-
Colour
breviation
DL1
Green - red
DL2
Blue
Push-but-
Description
ton
P1
Used to save or delete remote controls (capacity 100 remote controls with 2 buttons)
Trimmer
Description
TR1
Adjusts the wind sensor trip threshold in awnings mode whereas in rolling shutters mode it regulates the working time
3.2- Operation for rolling shutters (set DIP switch SW2 ON)
LED ab-
Colour
breviation
DL1
Green - red
DL2
Blue
Push-but-
Description
ton
P1
Used to save or delete remote controls (capacity 100 remote controls with 2 buttons)
Trimmer
Description
TR1
Sets the maximum time for performing complete opening or closing
16
All manuals and user guides at all-guides.com
Description
Manned (for rolling shutters only)
Automatic operation (for rolling shutters only)
Stopping movement (for awnings only)
Stopping movement excluding light sensor (for awnings only)
Operation for awnings with sensors
Operation for rolling shutters
Description
Flashing red indicates the wind sensor has tripped
Flashing green indicates the light sensor has tripped
Flashing green on while waiting for saving or deleting remote controls
LED on steady indicates mains power supply present
LED flashing indicates the rain sensor has tripped
Description
Flashing red indicates an error in the wiring (normally closed contact IN3 open or normally open contact IN1 or
IN2 closed) or photo-test failed.
Flashing green on while waiting for saving or deleting remote controls.
LED on steady indicates mains power supply present, with LED flashing until the motor power supply time
ends.
EN