Denon DVD-3800 Instrucciones De Operación página 14

ENGLISH
(4) Connecting a basic 5.1-channel surround system
Analog 5.1-channel audio signals can be output from the DVD-3800.
The multichannel audio signals recorded in packed PCM can be played when an AV amplifier equipped with analog 5.1-channel audio
inputs is connected.
DVD-3800
VIDEO OUT
SL
SR
NOTES:
For multi-channel connections, set "AUDIO CHANNEL" under "AUDIO SETUP" at "SETUP" to "MULTI CHANNEL" and make
•
the "SPEAKER CONFIGURATION", "CHANNEL LEVEL" and "DELAY TIME" settings.
• Set "LPCM (44.1 kHz/48 kHz)" under "AUDIO SETUP" at "SETUP" to "OFF". (See page 33.)
(If set to "ON", analog audio signals converted to 48 kHz or less will be output for linear PCM or packed PCM sources.)
• When playing DVDs that are not copyright-protected and the unit is set to output digital and analog audio signals simultaneously,
for some discs only the signals below 96 kHz for the front two channels will be output for the analog part.
When playing DVDs that are not copyright-protected, set "DIGITAL OUTPUT" at "PURE DIRECT MODE" to "OFF". (See page 43.)
• With the DVD-3800, we recommend turning the digital output off and only outputting analog signals in order to keep interference
from the digital output circuitry to the minimum and allow you to enjoy high bit, high sampling frequency, high quality multi-
channel sound.
14
COMPONENT
VIDEO OUT
Y S-VIDEO OUT
1 P /C 1
B B
2 P /C 2
R R
C FL2 FL1 COAXIAL OPTICAL
SW FR2 FR1
DIGITAL OUT
AUDIO OUT
(PCM / BIT STREAM)
Front speaker (left)
Surround speaker (left)
AV amplifier with 5.1-channel inpur terminals
REMOTE CONTROL
RS-232C ROOM TO ROOM
IN OUT
Center speaker
SURROUND MODE MULTI FUNCTION
DOLBY DTS WIDE 5CH / 7CH DSP MODE FUNCTION CONTROL
DIRECT STEREO SURROUND SURROUND SCREEN STEREO SIMULATION STATUS SELECT
PHONES
INPUT CINEMA / 6.1 / 7.1 VIDEO TONE REC /
MODE ANALOG EXT. IN MUSIC SURROUND ON / OFF DEFEAT M-ZONE 1 M-ZONE 2
INPUT REC SELECT / M-ZONE
To power outlet
AC IN
Front speaker (right)
Subwoofer
Surround speaker (right)