Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 87
► About the 30-second brushing notification timer
function
The toothbrush will pause once at 30-second intervals
to indicate the brushing time. The toothbrush pauses
twice at 2-minute intervals then starts again.
• Divide your teeth into 4 parts (upper
and lower, left and right), and brush
one part in order such as " front
of the teeth", " biting plane of the
teeth", and " back of the teeth"
spending 30 seconds.
By brushing the above 4 parts for
30 seconds each (about 2 minutes),
you can evenly brush your teeth
without missing any spots in your
mouth.
► Mode memory function
The mode used last is memorized.
The toothbrush operates in the mode last used when
the power switch is turned on.
Example: When the power switch is turned off after
using in the "REGULAR" mode (
from the "REGULAR" mode (
switch is turned on the next time.
PB019965 - EW-DC12
_(01GB)_02-19-21.indd 13

Using

• The appliance may not operate in an ambient
temperature approximately 5 °C or lower.
• Do not put the main unit in contact with hair care
products, hand creams, etc.
(Doing so may damage the exterior.)
1
Install the brush head onto the
toothbrush shaft properly.
• Ensure that the direction is correct.
Align the front of the main unit and
the front of the brush head.
• Do not attach the brush head by
twisting it into place.
(Doing so may damage the brush
head and main unit.)
• The toothbrush shaft will move
when a force is applied. This is
required for operation, and is not a
malfunction.
• There is a small gap between the
brush head and the main unit (a
), it will start
few mm). This is necessary for
) when the power
operation and is not a malfunction.
2
Place the toothbrush in your mouth.
• Apply a small amount of toothpaste.
• To avoid spattering of toothpaste, put
the brush head in your mouth before
turning the power on.
13
2021/2/19 15:30:45
Tabla de contenido

Solución de problemas

loading

Tabla de contenido