Safety Warnings - Ferroli EGEA 90 LT Manual De Uso, Instalación Y Mantenimiento

SAFETY WARNINGS

Read carefully before installing
ATTENTION and using the device.
The manual must be kept for future
reference until dismantling.
OBLIGATION
The manual is provided in paper format; how-
ever, it is available in digital version, which
can be downloaded from the website www.
ferroli.com by selecting the purchased
product.
Any intervention on the device,
including
performed by qualified person-
ATTENTION
nel with a suitable Refrigeration
Technician's Licence aimed at
the knowledge and management
of systems containing HC type
R290
gases such as R290 (Propane).
The unit can be used by children
aged 8 years and over and by
persons with reduced physical,
sensory or mental capacities, or
lacking in experience or the nec-
essary knowledge, provided they
ATTENTION
are supervised or have received
instructions regarding safe use
of the unit and understand the re-
lated hazards.
Children must not play with the
device.
Cleaning and maintenance op-
erations, which can be carried
out by the user, must not be per-
ATTENTION
formed by children without su-
pervision.
106
EN
disposal, must be
cod. 3541T580 - Rev. 06 - 04/2022
EGEA
Before carrying out any type of
intervention on the device, the
personnel in charge of mainte-
nance must refer to what is re-
ported in this manual in the fol-
lowing chapters and in particular
to consult chapter "8. REQUIRE-
MENTS FOR THE OPERATION,
ATTENTION
SERVICE AND INSTALLATION OF
APPLIANCES THAT USE FLAM-
MABLE REFRIGERANT GASES
ACCORDING TO ANNEX DD OF
EN 60335-2-40" on page 149.
During the design and construc-
tion phase of the systems, local
rules and regulations must be
ATTENTION
complied with.
The air inlet and outlet of the ap-
pliance must be channelled to
R290 the external environment as in-
dicated in paragraph 6.6 on page
136.
For equipment installation oper-
ations, refer to par. "6.4 PREPA-
RATION OF THE INSTALLATION
ATTENTION
SITE" on page 135 and par. "6.5
WALL FIXING" on page 136.
For the correct operation of the
device, the inlet water pressure
must be:
ATTENTION
- maximum 0.7 MPa (7 bar);
- minimum 0.15 MPa (1.5 bar).
90 LT - 120 LT