Door Reversal - Vitrifrigo TC30ABP1 Instrucciones Para El Uso

DOOR REVERSAL

Hinge fastening
To change the direction in which the appliance door opens, proceed as follows:
− Remove the top hinge.
− Pull the door upwards until it is freed from the bottom hinge.
− Remove the bottom hinge and fit it to the opposite side of the refrigerator.
− Refit the door on the bottom hinge.
− Refit the top hinge.
Base fastening
To change the direction in which the appliance door opens, proceed as follows:
− Remove the fastening screw beneath the base of the refrigerator.
− Pull the door downwards until it is freed from the top pin.
− Remove the pin in the top part of the door and place it on the other side.
− Refit the door on the refrigerator.
− Fix the door on the opposite side using the screw removed previously.
PANEL CHANGING
To remove and/or change the panel, proceed as follows:
− Remove the door, as indicated in the previous section.
− Loosen the screws on the lower base section and remove it.
− Remove the panel by sliding it out downwards.
− Insert a new panel in place of the old one, sliding it upwards as far as the stop.
− Refit the lower base section.
15