Vitrifrigo TC30ABP1 Instrucciones Para El Uso página 14

2. Version with electronic thermostat "RE" / "LPC" / "TC Basic" (fig.4)
Defrosting is carried out automatically, around every 22 hours.
3. Version with cyclical thermostat
Defrosting is carried out automatically around every 22 hours.
4. TC Midi / Full Version
Defrosting is carried out automatically around every 22 hours.
The MIDI/FULL version has a STAND BY function, which, in the event of lengthy
periods of disuse, reduces energy consumption even further by automatically setting
the refrigerator temperature to minimum.
LIGHTING SYSTEM MAINTENANCE
Lighting version with incandescent lamp.
Before replacing the lamp, make sure that the refrigerator is disconnected from the power
supply. If this is not the case, remove the plug from its socket.
To replace the lamp (see fig. 2A), proceed as follows:
− Remove the protective cover perpendicularly from the base. Take care not to damage the
fastening pins.
− Move one of the two springs in order to be able to slide out the lamp.
− Bend the two springs lightly towards one another and insert the new lamp.
− Make sure that the light is correctly tightened on the springs.
− Refit the cover.
Lighting version with LED lamp
Before replacing the LED lamp, make sure that the refrigerator is disconnected from the power
supply. If this is not the case, remove the plug from its socket.
To replace the LED lamp (see fig. 2B) proceed as follows:
− Remove the protective cover perpendicularly from the base. Take care not to damage the
fastening pins.
− Disconnect the power connector and then unscrew the fastening screws.
− Insert the new card, fix it into place with the relevant screws and connect the power cable.
− Refit the cover.
14