Starting The Robotic Cleaner; Cleaning Cycle; Stopping Robotic Cleaner Operation; Pulling Cleaner Unit Out Of The Water - Pentair PROWLER P10 Guia Del Usuario

4

Starting the robotic cleaner

Connect the power supply to the wall socket. The on/off button will lit and the robotic cleaner will start its cleaning
program. If the power supply is already connected to the wall socket, the on/off button will flash to indicate that the
robotic cleaner is in standby mode. Press the On/Off button in order to change the above mode (On to Off – standby,
or vice versa). Note: if the full filter indication light is ON make sure to remove and clean the filter prior to putting
the cleaner inside the pool water.

Cleaning cycle

During the cleaning cycle, the cleaner: (1) moves across the pool floor picking up dirt and debris. (2) Changes
direction and rotates automatically according to the selected program. (3) Climbs the pool walls every few minutes,
as set in its internal program. Note: The robotic cleaner might occasionally stop moving for a few seconds. This is
part of normal operation, not a malfunction.

Stopping robotic cleaner operation

The robotic cleaner moves automatically to ' s tandby' after every cleaning cycle and the on/off button starts flashing.
To stop the cleaner operation during a cleaning cycle, press the operation button once. On/off button starts flashing
and the cleaner is in standby mode.

Pulling cleaner unit out of the water

(1) Unplug the floating cable from the power supply. (2) Pull the floating cable until the unit is close enough to reach
the handle. (3) Using the handle, lift the cleaner out of the pool.

Bluetooth connection

The Prowler P20 model has the option of being connected to a bluetooth application, Scan the QR code in page 7
to access the App Store or Google Play When the application is installed and opened, it will start automatically to
scan to see if it can find a robot that works within Bluetooth range.
Power Supply
Prowler P10
On/Off
CAUTION: Do not use the floating cable
to lift the cleaner out of the water.
PROWLER P10 & P20 Robotic Inground Pool Cleaner Installation and User' s Guide
OPERATION
Power Supply
Prowler P20
On/Off
Full filter
indicator
Bluetooth