Blaupunkt 400 Serie Instrucciones De Uso página 33

PTY LANG (PTY SPRACHE):
Active only when PTY is ON (EIN).
Setting the PTY language.
Note: This only affects the display of the PTY
types, not station selection or other settings.
FM SENS HI/ LO (FM EMPF +/-):
Set the FM search sensitivity, HI (+) also searches for
stations with weak signal, LO (-) only searches for
local stations with strong signal.
FM HICUT OFF, 1, 2, 3 (FM HICUT AUS, 1, 2, 3):
To improve the sound of weak/distorted FM station
signals (in case of noises/interference), you can
automatically lower the treble range according to
the reception strength by activating this function.
RDS AF:
When this function is active, the unit always
switches to the best transmission frequency
(alternative frequency).
Note: This feature must be supported by the
radio station.
FM PRESETS (FM SPEICHEREBENEN):
Turning memory levels or FM2, FMT, AM, AMT
sources on/off. If the SRC button is inactive, the
corresponding memory level cannot be selected
with the SRC button.
DAB PRESETS (DAB SPEICHEREBENEN):
Activating/deactivating memory levels DAB2,
DAB3. If the SRC button is inactive the
corresponding memory level cannot be selected
with the SRC button.
DAB MODE:
Determines the basic setting of the right
button/knob. Options: SERVICE (default setting) or
BROWSE. Refer to "DIGITAL RADIO".
DAB SERVICE SCAN:
Updating the station list to DAB, scans the entire
DAB band and removes stations that cannot be
received from the list.
SERVICE LINK:
When you activate the DAB/FM/ALL function, the
unit switches, if available, to another DAB channel
(if available DAB is selected) or also to FM
frequencies (if FM or ALL is selected) to continue
playing the station if DAB reception is weak.
SERVICE NAME:
Switches the DAB SERVICE/DAB ENSEMBLE option
display to 16 or 8 digits.
DAB ANTENNA (DAB ANTENNE):
Enables phantom power supply for active DAB
antennas. If the DAB antenna is active, switch 12 V
to ON (AN).
REGION:
Setting the receiving region where the device is
used.
AUDIO (KLANG):
In this submenu you can adjust the sound individually.
Note: BASS (TIEFEN) and TREBLE (HOEHEN) can be
adjusted separately for each source.
BASS (TIEFEN):
Amplifies or reduces low frequency range.
TREBLE (HOEHEN):
Amplifies or reduces high frequency range.
BAL (BALANCE):
Adjusts the balance of the sound.
FADER:
Adjusts the audio signal of the front/rear speakers.
LOUD:
Loudness On/Off (bass enhance)
EQ:
Enable preset tone styles.
Note:
When the tone styles is on, the manual
setting of BASS (TIEFEN)/TREBLE (HÖHEN) is off.
SUB-OUT:
Adjust the output level (GAIN) and cut-off
frequency (FREQ) of the subwoofer output.
DISPLAY (ANZEIGE):
In this submenu, you can make settings for the display.
DIM MAN/ AUTO:
Toggling between the display brightness settings
manually/automatically.
AUTO: The ILLUMINATION input (see
"INSTALLATION/CONNECTIONS") automatically
toggles the display brightness between the preset
DAY (TAG) and NIGHT (NACHT) values depending
on the lighting in the vehicle.
MAN: pressing the DIS button for 2 seconds toggles
between preset DAY (TAG) and NIGHT (NACHT)
values.
DAY (TAG):
A preset display brightness during the day.
NIGHT (NACHT):
A preset display brightness at night.
SCROLL:
Scrolls the displayed content if it is longer than can
be displayed at a time. Options: Scrolling through
the new information once (1X) or always (ON (AN).
Select the menu language of the device. Available
languages: DEUTSCH/ENGLISH.
COLOR (FARBE):
Select the colour of the display and buttons (7
colours are available).
VOLUME (LAUTSTAERKE):
In this submenu, you can make volume settings for the device.
ON VOLUME (AN LAUTST):
Note: The startup volume is always limited to
max. 30.
TA VOL:
Set the volume of traffic announcements. If the
volume of the active traffic announcement is
adjusted, this setting will be updated or
overwritten.
HF VOL:
Set the volume of the hands-free system.