Selecting The Input Signal; Automatically Sizing And Centering The Picture (Auto) - Sony GDM-FW900 Manual De Instrucciones

Selecting the input signal

You can connect two computers to this monitor using the video
input 1 (HD15) and video input 2 (BNC) connectors. To switch
between the two computers, use the
Move the INPUT switch.
The currently selected connector ("INPUT 1" : HD15 or
"INPUT 2" : BNC) appears on the screen for a few seconds.
INPUT 1
Note
If no signal is input to the selected connector, NO INPUT SIGNAL
appears on the screen. After a few seconds, the monitor enters the power
saving mode. If this happens, switch to the other connector.
Automatically sizing and centering
the picture (AUTO)
You can easily adjust the picture to fill the screen by pressing the
ASC (auto sizing and centering) button.
Press the ASC button.
The picture automatically fills the screen.
ASC
Notes
• This function is intended for use with a computer running Windows or
similar graphic user interface software that provides a full-screen
picture. It may not work properly if the background color is dark or if
the input picture does not fill the screen to the edges (such as an MS-
DOS prompt).
• The picture will fill the screen to the edges only if the aspect ratio of the
picture is 16:10. Pictures with an aspect ratio other than 16:10 are
displayed at their actual resolution and do not fill the screen to the
edges.
• The displayed image moves for a few seconds while this function is
performed. This is not a malfunction.
switch.
INPUT
2
GB
9