Assembly And Set Up - unGer HiFlo DI140 Guia De Inicio Rapido

Thank you for your purchase of the Unger DI140 water system.
This guide will help you get setup and using your system right away.
1. Unpack
Make sure that you have all the parts listed below and access to a hose
bib (water supply):
Part Number
1
2
3
4
5
6
1

2. Assembly and Set Up

(NOTE: Assembly requires a crescent wrench.)
1. Wrap teflon tape (part #2) at least 2 times clockwise around the thread of the
hose adapter (part #1, longer end) and on/off valve threads (part #6).
2. Assemble Fittings
a. Screw in on/off valve assembly (part #6) on input side.
b. Insert the teflon tape-wrapped end of hose adapter
(part #1) into the output side of the system.
Tighten with crescent wrench (24 size).
www.ungerglobal.com
6
All manuals and user guides at all-guides.com
H F ™ Di140
i lo
Quick Start Guide
Qty.
1
1
2
2
1
1
2 3
Description
Hose Adapter
Roll of Teflon Tape
Blue Housing
Cartridge, pre-filled with resin
Housing Wrench
On/Off Valve assembly
4 5
INPUT
6
OUTPUT