Tabla de contenido
Idiomas disponibles
Idiomas disponibles
READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE
USING THIS EQUIPMENT. Failure to follow all instructions listed below, may result in electric shock,
fire, and/or serious personal injury or property damage.
1. FOR YOUR OWN SAFETY, READ INSTRUCTION
MANUAL BEFORE OPERATING THE TOOL. Learn
the tool's application and limitations as well as the
specific hazards peculiar to it.
2. KEEP GUARDS IN PLACE and in working order.
3. ALWAYS WEAR EYE PROTECTION. Wear safety
glasses. Everyday eyeglasses only have impact
resistant lenses; they are not safety glasses. Also
use face or dust mask if cutting operation is dusty.
These safety glasses must conform to ANSI Z87.1
requirements. NOTE: Approved glasses have Z87
printed or stamped on them.
4. REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and adjusting
wrenches are removed from tool before turning it
"on".
5. KEEP WORK AREA CLEAN. Cluttered areas and
benches invite accidents.
6. DON'T USE IN DANGEROUS ENVIRONMENT.
Don't use power tools in damp or wet locations, or
expose them to rain. Keep work area well-lighted.
7. KEEP CHILDREN AND VISITORS AWAY.
children and visitors should be kept a safe distance
from work area.
8. MAKE WORKSHOP CHILDPROOF – with padlocks,
master switches, or by removing starter keys.
9. DON'T FORCE TOOL. It will do the job better and be
safer at the rate for which it was designed.
10. USE RIGHT TOOL. Don't force tool or attachment to
do a job for which it was not designed.
11. WEAR PROPER APPAREL. No loose clothing,
gloves, neckties, rings, bracelets, or other jewelry to
get caught in moving parts. Nonslip footwear is
recommended. Wear protective hair covering to
contain long hair.
12. SECURE WORK. Use clamps or a vise to hold work
when practical. It's safer than using your hand and
frees both hands to operate tool.
13. DON'T OVERREACH. Keep proper footing and
balance at all times.
14. MAINTAIN TOOLS IN TOP CONDITION. Keep tools
sharp and clean for best and safest performance.
Follow instructions for lubricating and changing
accessories.
All manuals and user guides at all-guides.com
GENERAL SAFETY RULES
IMPORTANT SAFETY INSTRUCTIONS
All
SAVE THESE INSTRUCTIONS.
Refer to them often and
use them to instruct others.
15. DISCONNECT TOOLS before servicing and when
changing accessories such as blades, bits, cutters,
etc.
16. USE RECOMMENDED ACCESSORIES. The use of
accessories and attachments not recommended by
Porter-Cable may cause hazards or risk of injury to
persons.
17. R E D U C E T H E R I S K O F U N I N T E N T I O N A L
STARTING. Make sure switch is in "OFF" position
before plugging in power cord. In the event of a
power failure, move switch to the "OFF" position.
18. NEVER STAND ON TOOL. Serious injury could occur
if the tool is tipped or if the cutting tool is accidentally
contacted.
19. CHECK DAMAGED PARTS. Before further use of the
tool, a guard or other part that is damaged should be
carefully checked to ensure that it will operate
properly and perform its intended function – check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or
other part that is damaged should be properly
repaired or replaced.
20. DIRECTION OF FEED. Feed work into a blade or
cutter against the direction of rotation of the blade or
cutter only.
21. NEVER LEAVE TOOL RUNNING UNATTENDED.
TURN POWER OFF. Don't leave tool until it comes to
a complete stop.
22. STAY ALERT, WATCH WHAT YOU ARE DOING,
AND USE COMMON SENSE WHEN OPERATING
A POWER TOOL. DO NOT USE TOOL WHILE
TIRED OR UNDER THE INFLUENCE OF DRUGS,
ALCOHOL, OR MEDICATION. A moment of
inattention while operating power tools may result in
serious personal injury.
23. MAKE SURE TOOL IS DISCONNECTED FROM
POWER SUPPLY while motor is being mounted,
connected or reconnected.
24. THE DUST GENERATED by certain woods and wood
products can be injurious to your health. Always
operate machinery in well ventilated areas and
provide for proper dust removal. Use wood dust
collection systems whenever possible.
4
Tabla de contenido
