Operation; Important - Beurer ELLE HTE 40 Instrucciones Para El Uso

6. Operation

Warning
• Position yourself on a dry, non-conductive surface. Risk of electric shock!
• Make sure that your hands are dry! There is a risk of electric shock!
• The round brush [1], the heated brush [2] and the device may become very hot depending on the
switch setting and period of use – risk of burns and fire! Do not touch the round brush [1] or the
heated brush [2].
• Place the device on fireproof surfaces only. Risk of fire!
• Ensure that no hair can be directly sucked into the device. Risk of fire!

Important

• Do not jam the mains cable [10] in drawers or doors, for example.
• Untangle the mains cable [10] if it is twisted.
• Do not pull, twist or bend the mains cable [10] and do not pull or route it over/on sharp, pointed
objects or hot surfaces.
Note
A slight odour initially develops after switching on the device for the first time. This is normal and not
harmful to your health. Allow the device to run for three to five minutes. After that you can use the
device as normal.
• For your safety, the device switches off automatically if it overheats.
• Pull the mains plug out of the socket and allow the device to cool down.
• Before switching on again, check the air outlet and the air intake filter [7] for blockage (e.g. fluff,
dust and hair that has been sucked in).
Shaping hair
> Select the desired temperature level on the slide switch [4].
> Switch on the hot air styler by selecting the desired blower level on the slide switch [5].
> Dry and/or style your hair as you wish.
> After each use/interruption, always set the hot air styler slide switch to off [5] (position 0).
> Remove the plug from the socket after each use.
> Let the unit cool down.
> Do not wind the mains cable around the unit!
> Store the unit in a dry place that is out of reach of children.
> The unit can be hung on a hook by the hanging eyelet [9].
14