Operation - Beurer ELLE HTE 40 Instrucciones De Uso

6

Operation

Important
• Do not jam the mains cable [10] e.g. in a
drawer or door.
• Straighten the mains cable [10] if it
becomes twisted.
• Do not pull, twist or kink the mains
cable [10]; do not pull or lay it across/on
sharp, pointy objects or hot surfaces.
Warning
• Stand on a dry, electrically non-conductive
surface.
• Ensure that your hands are dry!
• Dry your hair beforehand with a towel.
• Depending on the switch setting and
duration of use, the round brush [1], the
thermal brush [2] and the unit can become
very hot – burn and fire hazard! Do not
touch the round brush [1] or the thermal
brush [2].
• Let the round brush [1] and the thermal
brush [2] cool down first before you take
them off.
• Place the unit only on a non-combustible
surface.
• Ensure that there are no highly flammable
liquids in the vicinity of the unit.
• Do not use the unit on artificial hair –
fire hazard!
• Ensure that no hair can be directly
sucked in.
14
Note
After switching on the unit for the first time, a
light odour develops for the first minutes. This
is normal and not hazardous to your health.
Let the unit run for three to five minutes. Then
you can use the unit normally.
• If the unit becomes overheated, it switches
off automatically for your safety.
• Remove the plug from the socket and let
the unit cool down.
• Before switching the unit on again, check
the air outlet [3] and the air intake filter [7]
for blockage (e.g. sucked-in lint, dust, hair).
Changing attachments
• Press the release button and pull the
attachment (e.g. the round brush [1]) off of
the hot air styler.
• Line up the imprinted arrow on the other
attachment (e.g. the thermal brush [2]) with
the release button.
• Push the attachment onto the hot air styler
until you hear it click into place.