Technical Specifications; Disposal - Beurer ELLE HTE 40 Instrucciones Para El Uso

Moldeador de aire caliente
Ocultar thumbs Ver también para ELLE HTE 40:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
• Before each use, remove any fluff, dust and hair from the air outlet and the air intake filter [7] using
an appropriately sized brush.
• If the round brush [1] and the heated brush [2] are very dirty, they must be removed from the
device and rinsed thoroughly under running water.
• Carefully dry the round brush [1] and the heated brush [2] after cleaning!
• The attachments may only be used again once they have fully dried off.

8. Technical specifications

Weight
Power supply
Power consumption
Safety class
Ambient conditions
Allowable temperature range
Subject to technical modifications.
The unit carries the CE mark and complies with the following EU directives:
• 2006/95/EC the Low Voltage Directive
• 2004/108/EC the EMC Directive

9. Disposal

In the interest of protecting the environment, the unit must not be thrown out with the household
waste at the end of its service life.
Dispose of the unit at a suitable local collection or recycling point.
Observe the local regulations for material disposal.
Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and
Electronic Equipment).
If you have any queries, please contact the appropriate local authorities.
Approx. 400 g
220 - 240 V ~, 50/60 Hz
1200 W
II
Only approved for indoor use
-10 to +40 °C
16
Tabla de contenido
loading

Tabla de contenido