Important - Skil 2421 Manual Original

8 Do not dispose of the charger together with
household waste material
9 Do not dispose of the battery together with
household waste material
USE
2
putting less or more pressure on the trigger
0
- connect charger to power source as illustrated
- green light B will turn on indicating that the charger is
- insert battery into charger as illustrated
! the battery can also remain in the tool while
charging; in that case the tool cannot be switched on
- green light B will blink indicating that the battery is
being charged
! remove battery from charger after charging
period has ended thereby lengthening the service
life of the battery

IMPORTANT:

this may mean:
charges batteries when its temperature is between
- the lithium-ion battery can be charged at any time
(interrupting the charging procedure does not damage
become warm to touch; this is normal and does not
indicate a problem
45°C; this will seriously damage the battery as well as
the charger
indicates that the battery is worn out and should be
replaced
! change direction of rotation only when tool is at a
complete standstill
!
- insert the bit as deep as possible in the chuck
- use screw bits in combination with a bitholder
! do not use bits with a damaged shank
! only use sharp bits
- output torque will increase as clutch ring C is rotated
and increase until the desired depth has been reached
! actuate the gear selector while tool is running
slowly
- high torque
- lower torque
switch A 2
^
switch A 2
! do not continue to press the on/off switch after
the tool is switched off automatically; battery may
be damaged
- when switch A 2
! while working, always hold the tool at the
grey-coloured grip area(s)
- do not apply too much pressure on the tool; let the tool
APPLICATION ADVICE
- lubricate drill bit occasionally with oil
the wood
2
8
@
#
$
%
&
2