Skil 2421 Manual Original página 7

Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
5) BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer.
another battery pack.
Use power tools only with specifically designated
battery packs.
When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
6) SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
SAFETY INSTRUCTIONS FOR CORDLESS DRILL/
DRIVERS
you start working
power source
when original accessories are used
Secure the workpiece (a workpiece clamped with
Hold the power tool only by the insulated gripping
surfaces when performing an operation where the
accessory may contact hidden wiring or its own
power cord
Use suitable detectors to find hidden utility lines or
call the local utility company for assistance (contact
damaging a gas line can result in an explosion;
penetrating a water pipe will cause property damage or
Do not work materials containing asbestos (asbestos
reactions and/or respiratory diseases to the operator or
wear a dust mask and work with a dust
extraction device when connectable
work with a dust extraction device when connectable
materials you want to work with
as well as when carrying or storing the tool
CHARGING/BATTERIES
the tool
will not exceed 50°C or drop below 0°C
check
immediately
with the charger
EXPLANATION OF SYMBOLS ON CHARGER/BATTERY
3 Read the instruction manual before use
4 Only use the charger indoors
5 Double insulation (no earth wire required)
6 Batteries may explode when disposed of in fire, so
do not burn battery for any reason
7 Store tool/charger/battery in locations where
temperature will not exceed 50°C
7
wear a dust mask and
2