PANEL/KEYBOARD
Increase/decrease intensity button
and parameter during the setup
LEFT button to move
to the previous phase
Fn button to modify the
execution time and to access
to the programming
P+/ P-/ok button to move
inside the menu and increa-
se/decrease the intensity
DISPLAY
Working phase
Battery
Program No.
Channel intensity
WARNINGS AND CONTRAINDICATIONS
MANDATORY BEHAVIOR
For safety reasons, the device must be used in the prescribed manner and within the limits of use
explained in this manual.
The manufacturer declines any responsibility due to a different use from what it is indicated in
this manual.
No part of this manual (texts and photos) may be reproduced by electronic or mechanical manner
without the prior written authorization of the manufacturer.
It is suggested not to carry out treatments in presence of skin wounds.
If the package, the cable or the connector of the power supply unit show signs of wear or dama-
ge, replace it instantly.
The unit should be connected to the mains by its power supply unit. Before starting the treat-
ment, make sure that the power system specifications comply with the directives in force within
your country. Make sure that the power supply unit will be in a comfortable position and that it
will be easy to be removed.
46
RIGHT button to move to
the next phase
Switching on/off
+ confirm button
Pause
Time
Working and resting
phase time
Rev.4 22.06.2018