Connections; Accessories; Electrode Application; Labelling And Symbols - RehabMedic Pro Stim 2 Manual Del Usuario

CONNECTIONS

ACCESSORIES

Cable connections: It is possible to use one or two cables according as you have chosen to use
one or two channels of the unit.
To connect the cable connector to the device plug it into the appropriate inlet in the upper part
of the unit.
The inlets are situated exactly under the correspondent channel (left or right). Insert the cable at
the channel you want to use.

ELECTRODE APPLICATION

Take the electrodes from the original package; all new electrodes have a seal on the package. Be
sure that the device is off. To start, connect the two cable plugs to the electrodes, then disconnect
the electrodes from their position and apply them on the skin. To place the electrodes correctly,
see the pictures included in this manual.
After the use, place the electrodes in their original position again.
ATTENTION: Do not unplug the electrodes if the unit is working.

LABELLING AND SYMBOLS

It refers to the manufacturer
Warning
This symbol on your device indicates that it complies
with the directives on medical devices (93/42/CEE
0 4 7 6
47/2007CEE). The number of the notified unit is 0476.
It indicates that this is a II class device
It indicates that this device has type BF parts
WEEE symbol (Waste of Electrical and Electronic Equip-
ment). Recycling symbol. The WEEE symbol used for this
product indicates that the device may not be disposed of
as a household product. Properly dispose of the product
to help protect the environment. For more information on
recycling this product, contact the local competent de-
partment, the household waste management company
or the store in which the product was purchased
It indicates the optimal temperatures for the storage
and transportation of the product
44
It indicates that the product has been produced in com-
pliance with the directive 2011/65/EEC.
It informs the operator that she must read the manual
before using the device.
IP22
It indicates the water protection degree
It informs the operator of a compulsory conduct
It refers to the pressure of the environment where the
device is used
It refers to the humidity of the environment where the
device and its accessories are used
It refers to the expiry date
It refers to the production lot
It refers to the manufacturing date
Indoor use
Rev.4 22.06.2018