General Setup Menu; Locking/Unlocking The Disc For Viewing; Recording Cd Tracks Onto Your Usb Device - Yamaha DVD-S663 Manual Del Usuario

Setup Menu

General setup menu

GENERAL SETUP PAGE
DISC LOCK
MP3 RECORD
PROGRAM
DISPLAY DIM
OSD LANGUAGE
SCREEN SAVER
SLEEP
DIVX(R) VOD CODE
Locking/Unlocking the disc for
viewing
Not all discs are rated or coded by the
manufacturer of the disc. You can prevent
playback of a specific disc by locking the disc.
You can lock up to 40 discs on this unit.
• Select [DISC LOCK] in "GENERAL
SETUP PAGE".
LOCK
Select this to lock playback of the current disc.
Subsequent access to a locked disc requires a
six-digit password.
The default password is "000 000" (see
"Changing the password" on page 40).
UNLOCK
Select this to unlock the disc and allow future
playback.
Recording CD tracks onto your
USB device
You can record CD tracks onto your USB
device connected to this unit.
The tracks are recorded in MP3 format.
28
En
Notes
• MP3 files created by this unit are restricted to
your private enjoyment only. Unauthorized use of
copyrighted recordings can be copyright
infringement.
• Yamaha and suppliers accepts no liability for the
loss of data saved on the USB devices connected
to this unit. As a precaution, it is recommended
that the files are made backup copies.
• Discs incompatible with CDDA standard are not
guaranteed to function.
• Copy protected music discs incompatible with
CDDA standard are not recordable.
• Tracks protected by SCMS (Serial Copy
Management System) are not recordable.
• If "USB current protection active. Device not
supported" appears on the TV screen, the device
is not usable with this unit because the power
consumption of the device is too high.
• "Device not supported" or "USB current
protection active. Device not supported" appears
on the TV screen when you connect the USB
device, this unit does not support the USB device.
In this case, use a different USB device.
• During recording, do not disconnect your USB
device or set this unit to the standby mode.
y
About the USB devices supported by this unit, refer
to "Supported USB devices" on page 23.
1
Connect your USB device to the USB port
of this unit (see "USB port" on page 12).
2
Load a music CD (see "Basic operation"
on page 17).
3
In "GENERAL SETUP PAGE", press
5/a to highlight [MP3 RECORD], and
then press 3 to select [SETUP].
4
Press ENTER.