Warning Messages And Alarms (Smartcloro Plus Ph) - pandapura SMARTCL15127 Manual De Instalación

54 24
4.3.1- Warnings
The 4 producti on LEDs (%) will
Configuración
OFF*

4.4- Warning messages and alarms (SMARTCLORO PLUS PH)

Cloro
h)
In the event of abnormal operati on, the SMART series equipment will display an alarm message on the
Relé
h)
4th line of the screen, together with an acousti c warning. The alarms shutdown the equipment unti l
the problem is solved. Similarly, it will display a warning also in the 4th line, but without an acousti c
↓
→
signal or shutti ng down the equipment. In this case, the equipment can conti nue operati ng, although
you are informed that correcti ve acti on should be taken.
0 : 00
0 : 00
FALTA SAL
0 : 33
0 : 00
0 : 00
0 : 00
Message:
"LACK OF SALT"
"EXCESS SALT"
Sensor cable of the cell is incorrectly connected or
"NO WATER FLOW"
"OVERLOAD"
fl ash. (Open circuit)
Reloj
Cl: 98%
2h 16 min
pH: 6.8
Causes:
Lack of salt in the water
Incrustati ons or objects in the electrolysis cell
causing excess current
The electrolysis cell is worn
Excess salt in the water
Incrustati ons or objects in the electrolysis cell
causing excess current
Excess gas in the electrolysis cell. It may be
because the pump has shutdown. The gas is
hydrogen gas which is highly fl ammable
broken
Cell sensor is dirty
No water fl ow
The cell is incorrectly connected
Metal body in the cell
Cell is incorrectly connected
Cell is damaged or completely worn down
Swimming pool water with very low salt
concentrati on
10 : 44↓
7 . 4 V
Semi - auto.
Relé OFF
16 29
Acti on required:
Add salt to the swimming pool
Clean the cell
Replace the electrolysis cell with a new
one
No acti on required if excess is not very
signifi cant
Clean the cell
The piping should be drained to
eliminate gas or accumulated water.
Check the pump
Check the sensor cable (white cable)
Clean. See maintenance
Check the water system
Check wiring
Turn off the equipment and remove the
metal body from the sheets
Check the cell connecti on and ensure
that cables and connecti on terminals are
in good conditi on
Check the conditi on of the cell
electrodes, and replace it if any damage
is observed
Ensure that the water has salt and that it
is dissolved