pandapura SMARTCL15127 Manual De Instalación página 45

4.2.2- Main screen
On starti ng up the equipment, a screen will be displayed with the main parameters.
C1: 98%
C1: 1.21ppm
pH: 6.7
→Menu
• The upper line displays the producti on %, the voltage of the electrolysis cell and the water
temperature consecuti vely.(If you do not have a temperature probe, --- º will appear).
→Configuración
• The second line displays the oxidati on /reducti on potenti al called RedOx or ORP (Oxidati on
Cloro
Reducti on Potenti al) or ppm if working with a free chlorine probe. "Man.", "Auto" or "Semi-
auto" is displayed on the right.
pH
• Important: If you do not have a RedOx probe or a free chlorine probe, the ORP reading
Relé
displayed may be a random value. When selecti ng the Manual mode (this mode is required if it
is to operate without a probe), the equipment will ask if you want to display the ORP line or to
conceal it.
→Lengua
• The third line displays the pH reading as long as it is fi tt ed in the equipment and the relay
status.
Control
The fourth line displays the → Menu (press the OK butt on to access the menu) and the ti me on C1: 98%
the clock. If any alarm or warning occurs, it will also be displayed on this line. Limpieza
C1: 1.21ppm
...
pH: 6.7
4.2.3- Main menu
→Menu
Press the "OK" butt on from the main screen to access the main menu.
→Configuración
Cloro
pH
Relé
Using the butt ons ↓↑ you can select a line of the menu, indicated by the arrow (→). The OK butt on is
→Lengua
used to confi rm the selecti on.
Control
To access the confi gurati on menu, you need to confi rm the operati on by selecti ng (S) through
the arrow, ↑ and pressing OK.
Limpieza
...
7 . 4V
6˚C
Auto.
Relé OFF
16 : 20
↓
7 . 4V
6˚C
4 h
Auto.
↓
Relé OFF
16 : 20
↓
4 h
↓
→Volumen, m3
Exterior
Cubierta, interr.
Flow switch:
→Acido
pH Alarm:
SALIR
→Volumen, m3
Exterior
Cubierta, interr.
Flow switch:
→Acido
pH Alarm:
SALIR
45
45 ↑
N ↓
↑
S
45 ↑
N ↓
↑
S