4- Start-Up And Adjustments; Smartcloro Series Equipment - pandapura SMARTCL15127 Manual De Instalación

4- START-UP AND ADJUSTMENTS

Once the SMARTCLORO salt water chlorinator has been installed, you can start up your salt
water chlorinati on equipment. Follow the instructi ons carefully. The following secti ons detail the
operati on of diff erent EVO models.

4.1- SMARTCLORO Series Equipment

4.1.1- Operation
Using the two P1 and P2 butt ons, you can adjust chlorine producti on.
Excess Salt
Lack of Salt
No water fl ow
Overload
• P2 increases producti on and P1 decreases it.
• The green LEDS (LED1 TO LED 5) indicate chlorine producti on: 0%, 25%, 50%, 75% and 100%
of the total.
• Adjustment is stored in the memory, even though the chlorinator is off .
4.1.2- Messages and alarms
The SMARTCLORO series equipment can detect anomalies in the operati on of the system, through
the following messages:
• Alarm owing to lack of water fl ow LED 7
• Alarm for overloading or short circuit: LED 6
• Alarm for open circuit: All power indicati on LEDs will remain fl ashing.
• Warning owing to lack of salt.
• Warning owing to excess salt.
100% LED5
LED9
75% LED4
LED8
LED3
50%
LED7
LED2
25%
LED6
LED1
0%
P2
P1
43