Headlight Adjustment - Mondial SMX 125 Serie Manual Del Proprietário

4. Pull out the position light bulb (E) by gently pulling it as shown.
5. Install a new position light bulb, then proceed to re-assemble the parts
in reverse order to before.

Headlight adjustment

For a quick check of the correct direction of the front light beams, place the
vehicle ten meters from a vertical wall and make sure the ground is level.
Turn on the low beam light, sit on the motorcycle and check that the light
beam projected to the wall is slightly below horizontal straight line (about 9/10
of the total height).
To adjust the light beam:
Tighten the screw (counterclockwise) to raise the light beam.
Undo the screw (clockwise) to lower the light beam.
75
MAINTENANCE
E