Clutch Lever Adjustment - Mondial SMX 125 Serie Manual Del Proprietário

Clutch lever adjustment

Adjust the clutch lever when the engine stops, or the vehicle tends to move
forward even when clutch lever is operated and the gear engaged, or if the
clutch" slides", resulting in acceleration delay considering the engine revs.
Minor adjustments can be carried out through the set screw (1):
1. Remove the protection casing (2).
2. Turn the set screw (1) until the empty travel of the clutch lever end
is approximately 10-15 mm (0.39 - 0.59 in) (see figure).
3. Check the vacuum stroke at the clutch lever end.
4. Refit the protection casing (2).
5. Lubricate the clutch wire frequently with suitable grease to avoid early
wear and corrosion.
CAUTION
Take your motorcycle to a F.B Mondial Official Dealer if it is not
possible to obtain a correct clutch adjustment or in case of
irregular clutch operation.
NOTE
Check the clutch wire is in good conditions.
There should be no signs of crushing or wear all along the sheath.
39
USE
E