Oil Change
Change oil every 100 hours.
•
Run the engine to warm oil.
Be sure the engine (equipment) is level.
Stop the engine.
Remove the oil drain plug (A) and drain the oil into
suitable container while engine is warm.
WARNING
Hot engine oil can cause severe burns. Allow
engine temperature to drop from hot to warm
level before draining and handling oil.
•
Replace the O-ring of the oil drain plug with a new
one.
•
Apply grease to the O-ring.
•
Tighten the oil drain plug.
Tightening Torque
Oil Drain Plug:
6.9 N·m (0.70 kgf·m, 61 in·lb)
•
Remove oil gauge and refill with fresh oil (See
"FUEL AND OIL RECOMMENDATIONS" chap-
ter).
•
Check the oil level (See "PREPARATION" chapter
for oil level check).
27
MAINTENANCE