Shortening The Control Cable; Inserting The Elbow Joint - Ottobock 12K42 ErgoArm plus Instrucciones De Uso

12K42
ErgoArm plus
12K42 ErgoArm plus, 12K44 ErgoArm Hybrid plus, 12K50 ErgoArm Electronic plus
12K44
ErgoArm Hybrid plus

Shortening the control cable

Reapply the ladder lock buckle:
Thread the control cable as shown in the
picture and secure with terminal knot.

Inserting the elbow joint

Carefully push the elbow joint back into
the forearm.
Attention: Be careful not to damage the
cables during re-assembly!
Safety instructions
12K50
ErgoArm Electronic plus
The ErgoArm 12K50 control cable can be
shortened because locking and unlocking
is controlled by electrode or switch signals.
Thread the supplied ball cord stopper on
the control cable end once it is shortened.
Attention!
Complete removal of the control cable is not
allowed due to safety reasons. Should the
ErgoArm not respond to electrical signals,
the control cable may be necessary to set
its position.
Ottobock | 41