Start And Stop; Operating - Chicago Pneumatic CP 1210 Instrucciones De Seguridad Y De Funcionamiento

Safety and operating instructions

Start and stop

Start the pneumatic breaker by pressing down the
trigger.
Stop the pneumatic breaker by releasing the trigger.
The trigger will automatically return to the stop
position.

Operating

Starting a cut
Stand in a stable position with your feet well away
♦
from the inserted tool.
Press the machine against the working surface
♦
before you start.
Start collaring at such a distance from the edge
♦
that the machine is capable of breaking the
material without levering.
Never try to break off too large pieces. Adjust the
♦
breaking distance (A) so that the inserted tool
does not get stuck.
16
www.CrowderSupply.com • Toll Free: 888-883-5144
CP 1210, CP 1230, CP 1240
Breaking
Let the machine do the work; do not press too
♦
hard. The vibration-reducing handle must
absolutely not be pressed all the way down to the
base.
For pneumatic breakers with vibration-reducing
♦
handles: The feed force should be adapted so that
the handles are pressed down 'half way'. The best
vibration damping and breaking effect is achieved
at this position.
♦ Avoid working in extremely hard materials for
example granite and reinforcing iron (re-bar)
which would cause substantial vibrations.
Any form of idling, operating without insertion
♦
tool or operating with an uplifted machine must
be avoided.
♦ When the machine is lifted, the start and stop
device must not be activated.
♦ Check regularly that the machine is well
lubricated.
9800 0608 90d | Original instructions