Operation; Start And Stop; Operating; Starting A Cut - Chicago Pneumatic CP 4123 Instrucciones De Seguridad Y De Funcionamiento

Safety and operating instructions
A
1. Slide the insertion tool shank into the oval
retainer hole.
2. Insert the insertion tool shank into the tool
bushing.
3. Rotate and lock the retainer on to the insertion
tool.
4. Slide the retainer on to the cylinder.
5. Lock the retainer by inserting the lock coil (A).
Standard retainer, oval collar insertion tools,
round shank
A
1. Slide the insertion tool shank into the oval
retainer hole.
2. Insert the insertion tool shank into the tool
bushing.
3. Rotate and lock the insertion tool into the
retainer.
4. Slide the retainer on to the cylinder.
5. Lock the retainer by inserting the lock coil (A).
14

Operation

WARNING Involuntary start
Involuntary start of the machine may cause injury.
Keep your hands away from the start and stop
►
device until you are ready to start the machine.
► Learn how the machine is switched off in the event
of an emergency.
Stop the machine immediately in all cases of
►
power supply interruption.

Start and stop

♦ Start the machine by squeezing the start and stop
device while firmly holding the handle.
♦ Stop the machine by releasing the start and stop
device. The start and stop device returns
automatically to the stop position.

Operating

Starting a cut

Stand in a stable position with your feet well away
♦
from the inserted tool.
Press the machine against the working surface
♦
before you start.
Start collaring at such a distance from the edge
♦
that the machine is capable of breaking the
material without levering.
9800 0606 90a | Original instructions
CP 4123, CP 4125