• The length of the cables used must enable the burner to be opened, as well as the
boiler door.
• The electrical connections must be made exclusively by qualified experts and the
relative regulations in force must bescrupulously applied.
• After removing the packaging materials, check the content integrity and make
sure that no damages have occured during transportation. In case of doubt, do
not use the burner and contact the supplier. The packaging material (wooden
cages,cartons, plastic bags, foam, clips, etc...) are potential sources of pollution
and danger, if left lying around; they should be collected up and disposed of in the
correct way (in a suitable place).
DESCRIPTION
These are forced-draught burners, with gas/air mix at the combustion head,two ignition
stages. The burners are completely automatic and equipped with controls assuring ma-
ximum safety. They can be combined with any type of chamber whether in negative or
positive pressure, within the foreseen working range. The burners are supplied without
a gas train and must therefore be completed with the train most suitable for the system
in which the burner is to be fitted. The gas train is therefore chosen by consulting the
diagram; this illustrates pressure loss as a function of mains gas pressure, required
gas delivery at the appliance and the back-pressure in the combustion chamber.All
the components can be easily inspected without having to disconnect from the main
gas supply. The burners are equipped with a cover which means they are particularly
compact, soundproof and safeguarded.
M
U
UK
25