Makita EM408MP Manual De Instrucciones Originales página 14

Replacing the nylon cord
WARNING:
Use only the nylon cord
with diameter specified in this instruction
manual. Never use heavier line, metal wire,
rope or the like. Failure to do so may cause
damage to the tool and result in serious per-
sonal injury.
WARNING:
Always remove the nylon
cutting head from the tool when replacing
the nylon cord.
WARNING:
Make sure that the cover
of the nylon cutting head is secured to
the housing properly as described in this
instruction manual. Failure to properly secure
the cover may cause the nylon cutting head to
fly apart resulting in serious personal injury.
Replace the nylon cord if it is not fed any more.
The method of replacing the nylon cord varies
depending on the type of the nylon cutting head.
14 ENGLISH