Idiomas disponibles
Idiomas disponibles
ADJUSTING THE OPTICAL COMPARTMENT
Movements of the optical compartment and the
shield are independent. This enables the light
source to be concealed to avoid dazzle.
To facilitate adjustment of the optical compar-
tment, remove it completely (fig. 19), rotate it to
the final position then adjust the orientation
(inserting it into the recess) as required.
In particular, with the optical compartment fully
inset (fig. 17), to adjust:
extract the anti-glare attachment completely
(fig. 18); line up the position of the optical com-
partment with the anti-glare attachment (fig. 19),
then adjust the spotlight to the required direc-
tion.
FITTING/REPLACING THE LAMP
Turn the electricity off at the
mains and follow the
instructions given below.
given below.
Fig.15
Fig.16
biSio
biSio 100 mm dia.
– Halogen Lamps with GU5.3 dichroic reflector
(50 W max)
biSio 130 mm dia.
Lamps with reflector:
– CDM-TC G8.5 (35W and 70W),
– CDM-T G12 (70W max),
– SDW-T GX12 (50W max)
– QT-12 GY6.35 (50W-150W)
Self-ballasting lamps:
– BRITESPOT GX10 (35W),
– HI SPOT GZ10 (50W max)
rotate the safety reflector anticlockwise and
remove (fig. 15);
Insert/replace the lamp with one of equal
rating as the ballast (see rating plate)
replace the reflector correctly (fig. 15) by
rotating clockwise;
NB: Always make sure the safety glass is undama-
ged and is firmly attached to the ring.
Fig.17
Fig.18
biSio 195 mm dia.
Lamps with reflector:
– CDM-T G12 (35W-70W-150W),
– SDW-T GX12 (50W-100W)
Self-ballasting lamps:
– HEG-PAR30S (100W max),
– HIR-PAR30L (35W-70W)
remove (fig. 15);
rating as the ballast (see rating plate)
rotating clockwise;
NB: Always make sure the safety glass is undama-
ged and is firmly attached to the ring.
Self-ballasting lamps:
QR111 G53 (100W max)
special slots (fig. 20), remove the anti-glare
bezel;
rating as the ballast (100W max) (fig. 21);
Fig.19
Fig.20
7
rotate the safety reflector anticlockwise and
Insert/replace the lamp with one of equal
replace the reflector correctly (fig. 15) by
using an appropriate tool inserted in the
Insert/replace the lamp with one of equal
replace the anti-glare bezel correctly (fig. 22);
Fig.21
Fig.22
